Cummins KTA50-C1600 Engine for Belaz 74131 Mining Service Truck
As the main means of transportation in open-pit mines, the belaz 74131 mine car can adapt to the harsh mining conditions in deep pits. The vehicle has a payload capacity of 130 MT and is mainly powered by a Cummins KTA50-C1600 engine with a main power of 1194 kW and a torque of 1500 RPM.
As part of EMAC, ConeMac provides industrial power pack solution that integrated with air intake, air exhaust, cooling system, control system, transmission and hydraulic accessories, We also supplying special products such as explosion proof engine, generator and water pump set, as well as ultra-low temperature condition engine power pack.
We provide full life cycle services for all customers, from design to power system supply, from installation to commissioning, from after-sales service training to spare parts supply, from trouble shooting to overhaul technical support.
Advantages of Cummins KTA50-C1600
Four-stroke diesel engine with compression ignition, direct fuel injection, without supercharging, with liquid cooling, mechanical speed controller.
Cummins KTA50-C1600 is part of the family of twelve-cylinder V-shaped diesel engines manufactured by the Yaroslavl Motor Plant.
Excellent reliability, Key parts design reserved fully surplus, strength is over 30 % more than the similar engine, engine life is longer.
Lower maintenance and repair costs, Lower maintenance and repair costs, fewer parts quantity and lower use fault Make the engine comprehensive maintenance cost greatly reduced and maintenance time than similar type save 50 %.
The Cummins KTA50-C1600 engine is used in Belaz 7413 dump trucks with a gross weight of up to 53 tons.
Technical Specifications
| Truck Model： | 74131 |
| Engine Model: | Cummins KTA50-C1600 |
| Rated Power: | 1194 kW |
| Payload Capacity: | 130 MT |
| Transmission: | hydromechanical |
| Torque: | 1500 RPM |
| Specific Fuel Consumption: | 209 g / kW * h |
| Load Box Volume: | 45.5 / 71.2 |
| Turning Radius: | 8.7 m |
| Unladen Mass: | 109500 kg |
| Full Mass: | 239500 kg |
| Maximum speed： | 50 km / h |
| Tires： | 33.00-51 |
| Dimension(L * W * H): | 11500 mm * 6400 mm * 5900 mm |
Truck Model | Engine Model | Engine brand | Rated Power | Torque |
| 74131 | KTA50-С1600 | Cummins | 1194 kW | 1500 RPM |
| ——END—— | ||||
General Infomation of CCEC KTA50-C1600 Industrial Engine | |||
| Engine Model | KTA50-C1600 | Standby Power | N/A |
| Maxi. Rating | 1600 HP @ 2100 RPM | Emission Standard | Euro II |
| Curve & Datasheet | P-4356 | Peak Torque | N/A |
| Compression Ratio | 13.9 : 1 | Displacement | 50.3 L |
| Type | 4 Cycle, 60° Vee; 16 Cylinder | Bore * Stroke | 159 mm × 159 mm |
| Fuel System | PT | Dry Weight (Fan Hub to Flywheel Engine) | 4858 kg |
| Aspiration | Turbocharged & Aftercooled | Wet Weight (Fan Hub to Flywheel Engine) | 5153 kg |
| Configuration | D283018CX02 | Packing Size (L * W * H) | 2690 mm * 1560 mm * 2260 mm |
| CPL Code Revision | 0758 | Firing Order | 1-5-3-6-2-4 |
Performance Data of CCEC KTA50-C1600 Industrial Engine | |||
| Minimum Low Idle Speed | 700 RPM | Maximum No-Load Governed Speed | 2400 RPM |
| Maximim Overspeed Capability | 2625 RPM | Torque Available at Clutch Engagement | 3078 N·m |
| Minimum Recommended Combined Cinverter and Hydraulic Stall Speed | 1800 RPM | ||
| Crankshaft Thrust Bearing Load Limit – Maximum Intermittent | 8900 N | ||
| Crankshaft Thrust Bearing Load Limit – Maximum Continuous | 4450 N | ||
| ——END—— | |||
Engine Performance Data CCEC KTA50-C1600 Industrial Engine | ||||
| Maximum | Continuous | |||
| Full Power | Peak Torque | Full Power | Peak Torque | |
| Engine Speed | 2100 r/min | 1500 r/min | 1800 r/min | 1500 r/min |
| Output Power | 1194 kW | 938 kW | 933 kW | 797 kW |
| Torque | 5424 N.m | 5966 N.m | 4944 N.m | 5071 N.m |
| Fan Power with 100°F (38℃) Radiator | N/A | N/A | N/A | N/A |
| Fan Power with 125°F (52℃) Radiator | N/A | N/A | N/A | N/A |
| Nominal Rail Pressure | 986 kPa | 703 kPa | 690 kPa | 552 kPa |
| Intake Manifold Pressure | 1296 mm Hg | 889 mm Hg | 914 mm Hg | 711 mm Hg |
| Brake Mean Effective Pressure | 1358 kPa | 1489 kPa | 1234 kPa | 1268 kPa |
| Piston Speed | 11.1 m/s | 7.9 m/s | 9.5 m/s | 7.9 m/s |
| Friction Horsepower | 231 kW | 114 kW | 169 kW | 114 kW |
| Intake Air Flow | 1685 L/s | 953 L/s | 1296 L/s | 880 L/s |
| Exhaust Gas Flow – Dry Manifold | 4191 L/s | 2662 L/s | 3181 L/s | 2450 L/s |
| Exhaust Gas Temperature – Dry Manifold | 482 ℃ | 566 ℃ | 496 ℃ | 549 ℃ |
| Heat Rejection to Coolant – Dry Manifold | 720 kW | 492 kW | 483 kW | 425 kW |
| Engine Water Flow | 40.4 L/s | 28.8 L/s | 34.6 L/s | 28.8 L/s |
| ——END—— | ||||
System Technical Data of CCEC KTA50-C1600 Industrial Engine | ||
| Exhaust System | Maximum Allowable Back Pressure | 75 mm Hg |
| Exhaust Pipe Size Normally Acceptable | 152 mm | |
| Air Industion System | Maximum Allowable Intake Air Restriction With Heavy Duty Air Cleaner — Clean Element | 380 mm H2O |
| Maximum Allowable Intake Air Restriction With Heavy Duty Air Cleaner — Dirty Element | 635 mm H2O | |
| Minimum Allowable Dirt Holding Capacity With Heavy Duty Air Cleaner | 11.8 g /L/s | |
| Lubrication System | Oil Pressure @ Idle – PSI | 138 kPa |
| Oil Pressure @ Rated Speed – PSI | 345-483 kPa | |
| Oil Flow Rate At Rated Speed – U.S.GPM | 625 L/min | |
| Maximum Allowable Oil Temperature | 120 ℃ | |
| Cooling System | Coolant Capacity – Engine only | 153 L |
| Maximum Coolant Friction Head External to Engine | 35 kPa | |
| Maximum Static Head of Coolant Above Engine Crank Centerline | 7.62 m | |
| Maximum Air Restriction Across Radiator | 12.7 mm H2O | |
| Minimum Raw Water Flow @ 90°F (32℃) to Heat Exchanger | 606 L/min | |
| Standard Thermostat (modulating) – Rang – °F(℃) | 175-195 (80-90) | |
| Maximum Coolant Pressure (Exclusive of Pressure Cap) | 283 kPa | |
| Minimum Allowable Pressure Cap | 50 kPa | |
| Maximum Allowable Top Tank Temperature | 95 ℃ | |
| Minimum Recommended Top Tank Temperature | 70 ℃ | |
| Minimum Allowable Fill Rate | 18.9 L/min | |
| Maximum Allowable Initial Fill Time | 5 min | |
| Minimum Allowable Coolant Expansion Space | 5 % | |
| Maximum Allowable Deaeration Time | 25 min | |
| Minimum Allowable Drawdown | 26 L | |
| ——END—— | ||
Note: All Above Data are Just for Reference, All Data Might Change Without Notices or Updates, Please Contact Our Sales Team to Confirm All Details Via WhatsApp or Email.
Engine Sale Manual
Installation Drawing
Installation Manual
Operation Manual
Parts Catalogue
![](/wp-content/uploads/2021/08/WhatApp-Icon.png"){kind=icon}
